Easy Grader

The classic teacher's grading chart, rebuilt for any test: enter the question count and read off the percentage and letter grade for every possible number of wrong answers.

Grade one paper at a time

Keyboard: W = +1 wrong · R = reset

The chart lists every possible number of wrong answers, the matching score, percentage and letter grade — the same layout as the classic sliding easy grader teachers have used for decades.

What an easy grader is — and why teachers still use one

The easy grader is one of the oldest tools in teaching: a sliding card, patented in the mid-twentieth century, that lines up the number of questions on a test with the number of wrong answers and reads off the percentage. No batteries, no formula, no mistakes. Teachers loved it because marking thirty papers at midnight is exactly when arithmetic errors happen, and a chart removes the arithmetic entirely. The digital version above does the same job for any question count from 1 to 500: enter the number of questions, and you get the complete chart — every possible number of wrong answers, the raw score, the percentage and the letter grade.

Students use it too, and for a good reason. The moment a test comes back marked "−4", most students want to know what that means before the teacher posts grades. Four wrong on a 20-question quiz is 80 percent; four wrong on a 50-question exam is 92 percent. The same red ink, two very different grades. This chart makes the conversion immediate, and because it shows every row, it also shows how close you were to the next letter — often a single question.

How the easy grader chart is calculated

Each row of the chart is one small division:

Percentage = ((Questions − Wrong answers) ÷ Questions) × 100

For a 25-question test with 3 wrong, that is (25 − 3) ÷ 25 × 100 = 22 ÷ 25 × 100 = 88% — a B+ on the plus/minus scale. The letter in the last column comes from the scale you select at the top: standard (A from 90%) or plus/minus (A from 93%, A- from 90%). Because each question on a short test is worth a lot, short quizzes produce coarse charts: on a 10-question quiz each question is worth 10 points, so the only possible percentages are 100, 90, 80 and so on, and a single careless mistake costs a full letter grade. On a 100-question exam each question is worth exactly 1 point and the chart is smooth.

Grading a whole stack of papers, one at a time

The full chart is the right tool when you want every score at once, but marking a stack of thirty papers is a one-at-a-time job — and that is what the Grade one paper at a time panel above the chart is for. Set the number of questions once, then count off the wrong answers on each paper: type the count, tap +1 wrong as you mark, or keep your hands on the keyboard and press W for each wrong answer and R to reset for the next paper. The score updates as you count, with the percentage shown to one decimal place, the letter grade on your selected scale, and the GPA equivalent — no division, no chart-scanning, and no losing your place in the stack. When the pile is done, the full chart below is still there for printing and for the boundary questions ("how many wrong for a B?") that students always ask afterwards.

Quick-reference grid for common test lengths

For the most common question counts, this grid shows the percentage for 0 to 5 wrong answers. Find your test length, read across to your number of mistakes, and you have your percentage without any calculation at all.

Questions0 wrong1 wrong2 wrong3 wrong4 wrong5 wrong
10100%90%80%70%60%50%
15100%93%87%80%73%67%
20100%95%90%85%80%75%
25100%96%92%88%84%80%
30100%97%93%90%87%83%
40100%98%95%93%90%88%
50100%98%96%94%92%90%
60100%98%97%95%93%92%

A worked example for the classroom

Mrs. Alvarez gives a 30-question spelling test. Jayden misses 4 words. His percentage is (30 − 4) ÷ 30 × 100 = 26 ÷ 30 × 100 = 86.7%, a B on the plus/minus scale (83–86 is B; 86.7 rounds into B territory on most charts, and the calculator above shows the exact value so the teacher can apply her own rounding rule). Amara misses 2: (30 − 2) ÷ 30 × 100 = 93.3%, an A. The chart also answers the follow-up question every student asks — "what if I'd got one more right?" — because the row above is sitting right there: one fewer mistake would have given Jayden 90%, an A-.

Rounding, half points and partial credit

A printed easy grader assumes every question is worth the same and there is no partial credit. Real marking is messier. Many teachers award half points, accept two answers, or weight the last questions more heavily. When that happens, the honest method is to switch from counting questions to counting points: add up the points earned and the points possible and use the points mode of our main grade calculator. The percentage formula is identical — the easy grader is simply the special case where every question is worth exactly one point. Teachers who curve a test can also use the chart twice: once for the raw score, and once after adding the curve points, to see how the class distribution shifts. Our article on grading on a curve explains when curves help and when they quietly hurt.

Tips for teachers using this chart

For the story of how this simple card became a classroom fixture — and how teachers combine it with modern grade books — read our guide on how teachers use an easy grader.

The history in brief: a cardboard computer

The easy grader belongs to a family of paper tools — slide charts and wheel calculators — that were the everyday computing devices of the early twentieth century. Patented in the 1930s and popularised in American classrooms after the Second World War, the E-Z Grader put a movable strip inside a printed sleeve: set the strip to the number of questions, and windows in the sleeve revealed the percentage for each number wrong. It sold for decades, in versions for different scales, because it solved a real bottleneck. A teacher with 150 students and a test every fortnight performs thousands of divisions a year; each one done by hand is a chance for an error that a student will eventually find. The chart eliminated the division entirely, and with it an entire category of marking mistakes. The digital version on this page is the same idea with a longer reach — any question count, either letter scale, and no cardboard to lose.

Choosing test lengths: the step-size problem

Teachers designing a test can use the chart before a single question is written. The governing idea is the step: the percentage cost of one wrong answer, which is simply 100 ÷ number of questions. A 12-question quiz steps by 8.3 points, so its possible grades are coarse — 100, 91.7, 83.3, 75 — and two students of genuinely different mastery can land on the same score while two similar students land a letter apart. A 40-question test steps by 2.5 points and separates students far more fairly. This is why experienced teachers either keep quizzes very short and low-stakes (accepting the coarseness because each quiz barely counts) or make assessments long enough for the steps to shrink below the width of a grade band. If you are a student wondering why your teacher's quizzes feel swingy, the step size is the answer — and why so many of those teachers drop the lowest quiz score, a policy our weighted grade calculator supports directly.

Frequently asked questions

How does an easy grader work?

You line up the number of questions on the test with the number of wrong answers, and the chart gives the percentage. Mathematically it is one division: (questions − wrong) ÷ questions × 100. This digital version builds the full chart for any question count, with letter grades on the standard or plus/minus scale.

What is 3 wrong on a 25-question test?

Three wrong means 22 correct out of 25, which is 22 ÷ 25 × 100 = 88%. That is a B on the standard scale and a B+ on the plus/minus scale. Short tests move fast: on a 25-question test, each question is worth 4 percentage points.

Why do short quizzes feel harsher than long tests?

Because each question carries more weight. On a 10-question quiz one mistake costs 10 points and a whole letter grade; on a 100-question exam one mistake costs a single point. The chart makes this visible — compare the 10-question and 50-question rows in the quick-reference grid on this page.

Does the easy grader handle half points or partial credit?

No — it assumes whole questions of equal value, which is what it was designed for. If your teacher awards half points or weights questions differently, count points instead of questions and use the points mode of the main grade calculator; the underlying percentage formula is exactly the same.

What scale should I select?

Pick the scale your school or teacher uses. The standard scale awards an A from 90%; the plus/minus scale awards A from 93%, A- from 90%, B+ from 87% and so on. If you are a teacher, the most defensible choice is whichever scale is printed on your syllabus — consistency is what matters.

Can I grade one paper at a time instead of reading the whole chart?

Yes — use the "Grade one paper at a time" panel above the chart. Set the number of questions once, then enter or count off the wrong answers for each paper: tap +1 wrong as you mark, or press W for each wrong answer and R to reset for the next paper. The percentage (to one decimal), letter grade and GPA equivalent update as you count.

Can I print the grading chart?

Yes. Build the chart for your question count, then use the Print chart button. The printed version drops the site navigation and shows just the clean table, sized for paper — the way teachers have kept a paper easy grader in the desk drawer for decades.

More free grade tools

Grade Calculator

Percentage, points and weighted-category modes with letter grade and GPA equivalent.

Test Grade Calculator

Turn correct answers into a percentage, letter grade and GPA points instantly.

Quiz Grade Calculator

Built for short quizzes, with ready-made tables for 5 to 30 questions.

Weighted Grade Calculator

Category weights, current standing and a drop-lowest option.

Semester Grade Calculator

Two marking periods plus the final exam, with a needed-score solver.

Final Grade Calculator

Exactly what you need on the final — including when it is already secured or out of reach.